Whether you’re a die hard rock band fan or a member of the local biker gang, making use of iron-on custom embroidered patches are a fantastic and great way to express yourself—apart from hiding that ugly tear on your favorite pants, jacket or accessories. Here are some useful points to remember before ironing-on those nice custom embroidered patches on your garments:
Find out the exact kind of patch that you have –
There are basically three types of patches: the Velcro type, the Iron-on type, and the Cloth/Fabric type. The Velcro type basically speaks for itself. It makes use of a Velcro to attach itself to the garment. The Iron-on type, on the other hand, makes use of a type of adhesive that requires the heat produced by an Iron to stick to the garment. Lastly, the Cloth/Fabric type just has a simple fabric material at the back, which requires sewing to attach itself to the garment.
Find out the garments fabric type –
Every garment has a label that indicates the fabric type and whether it can be ironed or not. Fabrics such as cotton and denim proved the ideal base for patches that can be ironed on. As a good rule of thumb, always pick a fabric that’s as heavy as the iron-on custom embroidered patches that you’ll use. Be exceptionally cautious when dealing with garments that are made of polyester fabric. Polyester can’t take the amount of heat necessary to iron patches. Ironing polyester can sometimes lead to burning or discoloration of the fabric. Delicate fabrics such as silk aren’t good options for patches either.
Consider the Patch’s design during Placement –
It would be a good idea to lay out the garment or specific accessory prior to ironing and decide on your patch’s exact placement on them. If you plan to use a single iron-on custom embroidered patch, put it in a very prominent position. Make it look as if the placement was intentional. If you plan on adding more patches later on, make sure that you have ample real estate on the garment or accessory for the other patches.
Make use of a heat resistant base when Ironing –
If you have an iron, it’s likely that you also have an ironing board. If in case you don’t have one for some reason, you may lay the item that you’ll be putting a patch on across a blanket or towel that has been doubled-up. Before ironing the patch itself, make sure to iron the surface where you’ll be putting the patch first to make sure that the adhesive will still better. If you’re ironing a patch on an item that’s difficult to iron, try your very best to arrange the item so that it’s flat against a heat resistant, hard surface.
Make sure to Place Iron-On custom embroidered patches in the desired position before Ironing –
Once you start ironing the iron-on patch, the adhesive will quickly melt and stick to the surface. To avoid any mistakes in placement, set the patch on the desired position first before pressing the hot iron against it. Double-check the position of the patch so that you won’t have any regrets later on.
Make sure that the Iron is on the Appropriate Setting –
Turning the iron too high may yield undesirable results. Make sure to gradually increase the setting of the iron instead of putting in on the highest setting straight away. Doing so would surely damage the patch or worse, damage the fabric of the garment or accessory where you’ll be placing the patch itself. Be cautious and start from the lowest setting first.
The above guidelines are very helpful before ironing the Custom embroidered patches on garments